Camera Reset - Bosch FLEXIDOME IP indoor 8000i Installation Manual

FLEXIDOME IP indoor 8000i
For instructions on how to replace the bubble, refer to the respective Quick Installation Guide.
10.4

Camera reset

To reset the camera to factory settings:
1.
2.
3.
1.
Bosch Security Systems B.V.
If the camera is already mounted, remove the camera module from its mounting plate.
Unscrew the thumb screw of the microSD card compartment. No tools are needed.
Open the lid of the microSD card compartment.
Press tightly and hold the reset button for 15 seconds.
The LED light by the reset button flashes in red when reset action is triggered.
Installation manual
Maintenance | en 39
2021-08 | 01 |