Wiring - Bosch FLEXIDOME IP indoor 8000i Installation Manual

10 en | Preparing for installation
Make sure that:
–
–
4.3

Wiring

Connect the camera to a 10/100 Base-T network:
–
–
Notice!
i
Use only PoE approved devices.
2021-08 | 01 |
Quantity Component
1 Quick installation guide
1 Safety information
3 Identification label sticker
All parts are included and without damage.
The necessary cable is ready for use (refer to Wiring, page 10 for more information):
network cable, shorter than 100 m.
Use STP Category 5e (or higher) network cable shorter than 100 m with RJ45 connectors
(the camera network socket is Auto MDIX compliant).
Power is supplied to the camera through the network cable compliant with the Power-
over-Ethernet standard.
Installation manual
FLEXIDOME IP indoor 8000i
Bosch Security Systems B.V.