FLEXIDOME IP indoor 8000i
5
In-box configuration
In-box configuration of the camera can be done via a wired connection with the camera still
inside the box, by using a mobile device or PC.
1.
2.
For more detail about the Project Assistant app, refer to Commissioning, page 32 .
5.1
SD card installation
Notice!
i
Bosch recommends the use of industrial micro SD cards with health monitoring.
1.
2.
3.
Bosch Security Systems B.V.
Connect a network cable with PoE, and wait 1 minute for the camera to power up.
Connect and configure the camera via the wired network by using the web interface, the
Project Assistant app or the Configuration Manager.
Unscrew the thumb screw of the microSD card compartment. No tools are needed.
Open the lid of the microSD card compartment.
Install the microSD card(s) in the microSD slot(s).
Installation manual
In-box configuration | en
11
2021-08 | 01 |