In-Box Configuration - Bosch FLEXIDOME IP starlight 8000i Series Installation Manual

14 en | In-box configuration
4

In-box configuration

In-box configuration of the camera can be done via a wired or wireless connection with the
camera still inside the box, by using a mobile device or PC.
1.
2.
For more detail about the Project Assistant app, refer to Commissioning, page 31.
2019.07 | 02 |
Connect a network cable with PoE, and wait 1 minute for the camera to power up.
A - Connect via wireless with the Project Assistant app by scanning the data matrix on the
box label or the QR code on the identification label stickers, and apply the required
configurations.
B - Connect and configure the camera via the wired network by using the web interface ,
the Project Assistant app or the Configuration Manager.
Installation manual
FLEXIDOME IP starlight 8000i
Bosch Security Systems B.V.