After Washing - Winterhalter GS 501 Operating Instructions Manual

8

After washing

Open hood and remove wash rack.
Remove and clean surface strainers.
Remove standpipe, tank is drained.
Note: If the dishwasher is fitted as an optional extra with a drain pump for pumping off
the tank water, the switch
The switch then lights up.
Pumping is ended by pressing the switch again.
Spray inside of dishwasher and clean.
Check whether the interior has been cleaned completely.
Remove any remains with a soft scraper or a soft brush.
If necessary, spray the inside of the dishwasher again.
For machines with a drain pump, check whether tank has been completely drained.
If necessary, press the switch
After draining, release the switch again.
Re-insert parts removed (standpipe, surface strainers, pump suction filter).
10
must be pressed after removing the standpipe.
again.
89005828