Reverse Door - Goddess RSD 083 GW8AF Instruction Manual

IV. REVERSE DOOR
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
à Ensure the unit is unplugged and empty.
à To take the door off, it is necessary to tilt the unit backwards. You should rest
the unit on something solid so that it will not slip during the door reversing process.
à All parts removed must be saved to do the reinstallation of the door.
à Do not lay the unit flat as this may damage the coolant system.
à It's better that 2 people handle the unit during assembly.
1. Carefully remove the top hinge cover with
a flat screw driver.
2. Unscrew the top hinge with a philiphs screw driver.
3. Remove the hole cover with a flat screw driver.
4. Move the core cover from left side to right side.
And then lift the upper door and place it on a padded
surface to prevent it from scratching.
EN - 47
EN