Table of Contents
Advertisement
Available languages
Available languages
EnG
DooR SEaL STRiPS CLEanSinG
If door seal strips are smeared with oil or soy sauce esp. on both the upper and the lower door
parts, they are easy to get damaged. Be careful while removing dirt.
oUTER CabinET CLEanSinG
Wipe off dirt with soft cloth. If there are some oil stains, it is necessary to use detergents.
ChanGinG oF ThE LamP
If the lamp does not work, remove its lamp cover and change to the lamp bulb of kind of E14,
220V, 10W.
DEFRoSTinG
Too thick frost takes a negative effect on refrigeration and increases energy consumption.
When the thin frost appear in the frozen food compartment , shovel it away. But if the thick frost
does, it had better stop to defrost and wipe off melting water with towel or soft cloth. Generally
speaking, a defrosting interval is about 2 to 3 months.
Melting water flows into the water pan installed above the compressor , which will be eva-
porated by the heat from the compressor.
WaRninG Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the manufacturer
WaRninG Do not damage the refrigerant circuit.
WoRDS FoR CUSTomERS
1.
It is not good to get wet because of possible rust, which will cause mechanical breakdowns.
If electric components such as switches get wet, please use dry cloth.
.
To protect its coating surface and plastics parts, such things are not permitted to use as
detergents, erosive cleansing lotions, brooms, gasoline, chemical solvent, alcohol, acids,
boiled water.
3.
To avoid damaging coated surface and plastic parts, cleansing with chemical cloth is not
permitted.
4.
If plastics parts are smeared with oil, wipe it off immediately to keep them from aging.
5.
Please check after maintaining:
- Whether something damaged or cracked on the power line;
- Whether the plug inserted in a socket in a safety way;
- Whether something abnormal occurring, such as, abnormal heat of the plug.
ENG - 22
Advertisement
Chapters
Table of Contents
