Grizzly T32253 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Power Tool
  5. T32253
  6. Owner's manual

Grizzly T32253 Owner's Manual

Variable-speed buffer w/work light
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL T32253/T32254
VARIABLE-SPEED BUFFER
w/WORK LIGHT
OWNER'S MANUAL
(For models manufactured since 08/20)
COPYRIGHT © NOVEMBER, 2020 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CS21330 PRINTED IN TAIWAN
V1.11.20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T32253 and is the answer not in the manual?

Questions and answers

Related Manuals for Grizzly T32253

Summary of Contents for Grizzly T32253

  • Page 1 (For models manufactured since 08/20) COPYRIGHT © NOVEMBER, 2020 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #CS21330 PRINTED IN TAIWAN V1.11.20...
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Table Of Contents

    Contact Info ..........................2 Manual Accuracy ........................2 Identification ..........................3 Controls & Components ......................4 T32253 Data Sheet ........................5 T32254 Data Sheet ........................7 SECTION 1: SAFETY ........................9 Safety Instructions for Machinery ....................9 Additional Safety for Buffers..................... 11 SECTION 2: POWER SUPPLY ......................

  • Page 4: Introduction

    ID label (see below). This information is required for us to provide proper tech support, and it helps us determine if updated documenta- tion is available for your machine. Manufacture Date Serial Number Model T32253/T32254 (Mfd. Since 08/20)

  • Page 5: Identification

    Become familiar with the names and locations of the controls and features shown below to better understand the instructions in this manual. Work Light Motor Buffing Wheel Spindle Digital Readout ON/OFF Switch w/Disabling Key Variable-Speed Dial To reduce your risk of serious injury, read this entire manual BEFORE using machine. Model T32253/T32254 (Mfd. Since 08/20)

  • Page 6: Controls & Components

    Figure 3. LED work light. B. Spindle: Secures and spins buffing wheels. T32253 accepts wheels up to 12" in diameter LED Work Light: Illuminates buffing area for with a ⁄ " bore. T32254 accepts wheels up to better visibility.
  • Page 7 MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL T32253 1/2 HP VARIABLE‐SPEED BUFFER WITH WORK LIGHT Product Dimensions: Weight................................30 lbs. Width (side-to-side) x Depth (front-to-back) x Height..............16-1/2 x 12 x 18 in.
  • Page 8 The information contained herein is deemed accurate as of 9/15/2020 and represents our most recent product specifications. Model T32253 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model T32253/T32254 (Mfd. Since 08/20)
  • Page 9 The information contained herein is deemed accurate as of 9/15/2020 and represents our most recent product specifications. Model T32254 PAGE 1 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model T32253/T32254 (Mfd. Since 08/20)
  • Page 10 The information contained herein is deemed accurate as of 9/15/2020 and represents our most recent product specifications. Model T32254 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model T32253/T32254 (Mfd. Since 08/20)

  • Page 11: Section 1: Safety

    Never operate under the influence of drugs or injury or blindness from flying particles. Everyday alcohol, when tired, or when distracted. eyeglasses are NOT approved safety glasses. Model T32253/T32254 (Mfd. Since 08/20)
  • Page 12 Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. -10- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 13: Additional Safety For Buffers

    Failure to do so could result in serious per- risk of operator injury. If normal safety pre- sonal injury, damage to equipment, or poor cautions are overlooked or ignored, serious work results. personal injury may occur. -11- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 14: Section 2: Power Supply

    For your own safety and protection of Full-Load Current Rating (T32253) ..3 Amps property, consult an electrician if you are Full-Load Current Rating (T32254) ..6 Amps unsure about wiring practices or electrical codes in your area.
  • Page 15 Additionally, it must meet the following size requirements: Minimum Gauge Size (T32253) ...16 AWG Minimum Gauge Size (T32254) ...14 AWG Maximum Length (Shorter is Better)..50 ft. SHOCK HAZARD! Two-prong outlets do not meet the grounding requirements for this machine.

  • Page 16: Section 3: Setup

    IMPORTANT: Save all packaging materials until you are completely satisfied with the machine and have resolved any issues between Grizzly or the shipping agent. You MUST have the original pack- aging to file a freight claim. It is also extremely helpful if you need to return your machine later.

  • Page 17: Cleanup

    Avoid harsh solvents like acetone or brake Lock entrances to the shop parts cleaner that may damage painted sur- or disable start switch or faces. Always test on a small, inconspicu- power connection to prevent ous location first. unsupervised use. -15- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 18: Bench Mounting

    There is a range of options when it comes to buff- The strongest mounting option is a "Through ing and polishing wheels, but the Model T32253/ Mount" (see example below) where holes are T32254 comes with two muslin wheels: one loose drilled all the way through the workbench—and...

  • Page 19: Test Run

    The toggle switch Switch safety feature is not working correctly. This safety feature must work properly before proceeding with regular operations. Call Tech Support for help. Figure 10. Control panel components. -17- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 20: Section 4: Operations

    Regardless of the content in this sec- in this manual are easier to understand. tion, Grizzly Industrial will not be held liable for accidents caused by lack of training. Due to the generic nature of this overview, it is not intended to be an instructional guide.

  • Page 21: Disabling Switch

    Placing one hand near key in a well-hidden or secure location! contact point will give you better control. (Right Side View) FRONT Workpiece contact here BOTTOM Figure 13. Workpiece contact zone. -19- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 22: Selecting Buffing Wheels

    Use caution when polishing plated metals; rough cutting plastics there is a chance that thinly-plated materials and initial polishing a could be damaged. Light pressure is all that wide variety of metals. is needed for quality work. -20- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 23: Installing/Removing Buffing Wheel

    Install the muslin metals and plastics. wheels that came with your buffer or one appro- priate for your operation. The T32253 accepts Laminated Sisal wheels with a ⁄ " bore while the T32254 requires Designed for rough ⁄...

  • Page 24: Selecting Buffing Compounds

    White Rouge BOTTOM Black Rouge Buffing Sequence: R = Rough F= Final Cut, Initial Polish P = Final Polish Figure 16. Location where buffing compound should contact wheel. Turn machine OFF when operation is complete. -22- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 25: Section 5: Accessories

    Installing unapproved accessories may additional recommended accessories. cause machine to malfunction, resulting in serious personal injury or machine damage. To reduce this risk, only install accessories T32253 Buffing Wheels recommended for this machine by Grizzly. MODEL TYPE SIZE MAX RPM D2512 Soft Muslin 5"...

  • Page 26: Section 6: Maintenance

    SECTION 6: MAINTENANCE Cleaning To reduce risk of shock or accidental startup, always Cleaning the Model T32253/T32254 is relatively disconnect machine from easy. Vacuum excess debris and wipe off the power before adjustments, remaining dust with a dry cloth. Wipe down spin- maintenance, or service.

  • Page 27: Section 7: Service

    5. Incorrect stroke for buffing compound/wheel/ 5. Use upward stroke with heavy pressure for cutting; material. downward stroke with light pressure for polishing. 6. Use correct buffing wheel (Page 20). 6. Incorrect type of buffing wheel for material. -25- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 28: Section 8: Wiring

    Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -26- Model T32253/T32254 (Mfd. Since 08/20)

  • Page 29: T32253 Wiring Diagram

    12V 15W Film Cap 0.47uF K 310V Ground Fuse 110 VAC 5-15 Plug CON2 BUSSMAN BUSSMAN CON1 10A 250V 10A 250V LED Light Figure 22. T32253 start capacitors. READ ELECTRICAL SAFETY -27- Model T32253/T32254 (Mfd. Since 08/20) ON PAGE 26!

  • Page 30: T32254 Wiring Diagram

    12V 15W Film Cap 0.47uF K 310V Fuse Ground 110 VAC 5-15 Plug CON2 BUSSMAN BUSSMAN CON1 10A 250V 10A 250V LED Light Figure 23. T32254 start capacitors. READ ELECTRICAL SAFETY -28- Model T32253/T32254 (Mfd. Since 08/20) ON PAGE 26!

  • Page 31: Electrical Component Photos

    Electrical Component Photos Figure 24. T32253 switch wiring. Figure 26. T32254 switch wiring. Figure 27. LED wiring. Figure 25. Control unit wiring. READ ELECTRICAL SAFETY -29- Model T32253/T32254 (Mfd. Since 08/20) ON PAGE 26!

  • Page 32: Section 9: Parts

    SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. Main BUY PARTS ONLINE AT GRIZZLY.COM! -30- Model T32253/T32254 (Mfd.
  • Page 33 BASE PLATE PT32254026 JUNCTION BOX PT32254013 RUBBER FOOT PT32253028 ON/OFF SWITCH JI-HONG J9301-1YT PT32254014 TAP SCREW M3.5 X 10 PT32253029 VARIABLE-SPEED DIAL BUY PARTS ONLINE AT GRIZZLY.COM! -31- Model T32253/T32254 (Mfd. Since 08/20) Scan QR code to visit our Parts Store.

  • Page 34: Labels & Cosmetics

    Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. BUY PARTS ONLINE AT GRIZZLY.COM! -32- Model T32253/T32254 (Mfd.

  • Page 35: Warranty & Returns

    WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

This manual is also suitable for:

T32254

Table of Contents