Grizzly T31643 Instructions Manual

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T31643 2-Ton Bear-Lift Pro Pallet
Stacker is the perfect tool for stacking pallets when
the operator does not want the fuss of recharging
or gassing up. Hydraulic manual lift design offers
either hand or foot operation and locks to keep it
in place. The T31643 comes fully assembled with
adjustable forks; hard-chromed, polished pistons;
and double-sealed, polyurethane oil seals.
Specifications
Maximum Capacity ............................... 4000 lbs.
Maximum Lift Height ...................................... 62"
Lift Type ................................... Manual Hydraulic
Fork Width ......................................... 9½" – 37¾"
Maximum Pallet Width .................................... 42"
Figure 1. Model T31643.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
COPYRIGHT © NOVEMBER, 2019 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 9/19) #CS20680 PRINTED IN CHINA
MODEL T31643
2-TON BEAR-LIFT PRO
PALLET STACKER
INSTRUCTIONS
To reduce your risk of
serious injury, read this
entire
using machine.
Do
stacker with passenger on
forks. A fall from raised
forks could result in injury
or even death.
INJURY HAZARD!
• Do not exceed maximum load capacity.
• Do not reach under or over moving parts
to avoid pinch and crush points.
• Keep clear of forks when lowering load.
• Pull release lever slowly when lowering
forks.
• Only use on a flat, even surface.
• Do not transport loads with forks raised
more than 5".
• Always store stacker with forks low-
ered and without load. Do not leave
unattended while in use.
manual BEFORE
FALL HAZARD!
not operate pallet
V1.11.19