Page 1
Connected Contactor 4 121 71 Requires the installation of a : Connected Starter Pack Gateway module "... with Netatmo" Composition Composition Control wiring authorized EN 60669-2-1 Self-protected line OUT ON/OFF AUTO Load Connected Contactor oooooooooooooooo oooooooooooooooo ooooooooooo oooooooooooooo ooooooooooo ooooooooooooooo...
Page 2
C1, C2: Preparation, connection 2x 1.5mm² 2.5mm² N, L, Load: 2x 2.5mm² Turn off the power 6mm² at general circuit breaker C1,C2, N, L, Load: MIN : 0.8Nm 4 mm MAX : 1.4Nm Wiring examples Thanks to its control circuit with integrated power and protection, you no longer need to install a circuit breaker 2A to protect the control circuit if you wire a contact between C1 and C2 A load protection circuit breaker with appropriate rating is required...
Page 3
All devices LED go OFF. <1s <1s Finalize the installation in the Legrand Home + Control app To add this connected product and peripheral items in your connected installation, you must follow the instructions: - with Legrand Home + Control app...
Page 4
Automatic Mode AUTO OFF AUTO ON ON/OFF Mode www.legrand.fr/reference/412171 LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.com EU SIMPLIFIED DECLARATION OF CONFORMITY The undersigned, Legrand declares that the radio equipment listed on this instruction sheet are compliant to the directive 2014/53/UE.
Need help?
Do you have a question about the 4 121 71 and is the answer not in the manual?
Questions and answers