Porsche 911 Installation And Conversion Instructions page 9

Installation and Conversion Instructions
3 Route and connect electric wire harness
1
2
3
4
5
Line routing (
• Front camera → headliner/roof console → along windshield frame → right A-pillar (top) →
along A-pillar → fuse carrier on dashboard, right → over center tunnel to fuse box and left
ground pin.
3.1
– Interior mirror
– Installation position of PORSCHE front camera (dashcam)
– Electric wire harness
– Fuse box on dashboard (at the left)
– Ground pin

Figure 11):
Routing wire harness
3.1.1 On the connector side, push one
protective foam roll onto the wire
harness for the front camera
retainer plate and the (3-wire) wire
harness.
1
– Protective foam roll
2 – Wire harness on front
camera retainer plate
3 – Wire harness (3-wire)
4 – Connection for wire
harness on retainer plate
3.1.2 Connect plug connection (3-pin) (
Figure 12 -Arrows-).
Tequipment
911 (992)
06 / 21
Figure 11

9
9163
ENU
Figure 12
Jul 7, 2021
Page 9 of 21