Porsche 911 Installation And Conversion Instructions page 11

Installation and Conversion Instructions
3.2 Connect electric wire harness
Function/line:
Ground
Terminal 31 = BK; 0.5²
Ignition positive
Terminal 15 = GN; 0.5²
Permanent positive
Terminal 30 = RD; 0.5²
3.2.1 Remove fuse holder and open
rows A and C.  Workshop Manual
'Loosening and securing fuse box in
front left footwell'
1 – Fuse row A, Black for
terminal 15
2 – Fuse row B, Black for
terminal 30
3 – Fuse carrier on dashboard
(left)
3.2.2 Connect power supply as shown in
the table.
3.2.3 Close fuse holders in row A and
C and install into the fuse carrier.
Install fuse carrier.
Manual 'Loosening and securing
fuse box in front left footwell'
3.2.4 Protect front camera power supply by inserting new small 5A fuses into slots F5
and F8.
Fuse: Required value 5 A
Tequipment
Connection point - LHD
vehicle
Cable ring eyelet
(992.971.859.B) on left
ground pin next to fuse
box under carpet
Socket contact N 906.844.01 on fus-
e holder, Yellow C, fuse F5
On GT vehicle with lap trigger, one double
connector on bk/wt 0.35 mm2 line.
5A fuse, small
Socket contact N 906.844.01 on fuse
holder, Black A, fuse F8
5A fuse, small
 Workshop
911 (992)
06 / 21
9163
ENU
Figure 15
Jul 7, 2021
Page 11 of 21
9