Porsche 911 Installation And Conversion Instructions page 13

Installation and Conversion Instructions
Coding: 5 Code the PORSCHE front camera (dashcam) in Dealer mode
5.1
5.2
Preparatory work
1
– PORSCHE front camera
2 – Micro SD memory card (32 GB)
3
– Retainer plate
4
– Power button
5
– WiFi status LED display
6
– PRESS (release button)
5.1.1 Remove micro SD memory card (32

GB, Figure 18 -2-) from card slot
for front camera.
5.1.2 With the ignition switched on, push
the front camera (dashcam

shield ( Figure 18 -3-)
5.1.3 Press the power button (
double beeping sound.
5.1.4 The front camera (dashcam) starts in Dealer mode: WiFi LED (
lights up "yellow".
Connect the front camera (dashcam) to the device (tablet, smartphone or PC)
Information
The "Dealer mode" network ID name ends with a "D". A password is NOT required!
The language setting can be changed by following the menu prompts after opening
the first page.
5.2.1 Search available networks for Dealer mode WiFi.
5.2.2 Open Dealer mode on the device (tablet, smartphone or PC) using any browser.
To do this, enter "192.168.1.1/diagnostics" in the browser's address line.
5.2.3 Displays in "Dealer mode" main menu:
Tequipment
911 (992)
06 / 21
 Figure 18 -1-) into the retainer plate on the wind-
 Figure 18 -4-) for 10 seconds until you hear the second
9
9163
ENU
Figure 18
 Figure 18 -5-)
Jul 7, 2021
Page 13 of 21