Emptying The Hydraulic Tank - Labrie AUTOMIZER VERSA HAND Maintenance Manual

112 Hydraulic System
Figure 5-23 5-psi relief valve and breather cap
Figure 5-24 Pressure gauge and regulator
Caution!

Emptying the Hydraulic Tank

To empty the hydraulic tank:
Prepare the vehicle:
1.
Apply the parking brake
1 a.
Start the engine
1 b.
Engage the hydraulic pump
1 c.
Retract all cylinders (packer, crusher panel, tailgate, etc.)
1 d.
Raise the body and install the safety prop
1 e.
Relief
valve
The pressure inside the tank shall not exceed 5 psi.
Breather
cap
Pressure
regulator
Pressure
gauge