Rear View Of The System - Dell EMC PowerEdge R250 Installation And Service Manual

Table 1. Features available on the front of the system
Item Ports, panels, and
slots
1 Left control panel
2 Optical drive
3 Drive
4 Right control panel
5 Information tag
NOTE: For more information, see the Dell EMC PowerEdge R250 Technical Specifications on the product documentation
page.

Rear view of the system

Figure 4. Rear view of the system
Table 2. Rear view of the system
Item Ports, panels, or slots
1 Serial port
2 Ethernet ports
3 PCIe expansion card slot 1 N/a
4 PCIe expansion card slot
2
5 Cabled power supply unit
6 CMA jack
7 System ID button
8 PowerEdge R250 system overview
Icon
N/A
N/A
N/A
N/A
N/A
Icon Description
N/a Enables you to connect serail devices to the system.
The Ethernet ports that are integrated on the system board
provide network connectivity. These NIC ports can also be shared
with iDRAC when iDRAC network settings is set to shared mode.
Enables you to connect PCI Express expansion cards.
N/a Enables you to connect PCI Express expansion cards.
Indicates the PSU.
N/a Enables you to connect to cable management arm LED
Press the system ID button:
● To locate a particular system within a rack.
Description
Contains the system health, and system ID.
One optional slim SATA DVD-ROM drive or DVD+/-RW drive.
Enables you to install drives that are supported on your system.
Contains the power button, USB port, iDRAC Direct micro port,
and the iDRAC Direct status LED.
The Information tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address,
and so on. If you have opted for the secure default access
to iDRAC, the Information tag also contains the iDRAC secure
default password.