Tripp Lite B127A-1A1-BDBD Owner's Manual page 18

Displayport over cat6 4k extender kits and receiver with repeater

Hide thumbs Also See for B127A-1A1-BDBD:

Table of Contents

USB/IR Controls

The B127A-1A1-BDBD and B127A-1A1-BDBH extender kits provide the

following functional controls:

• USB 1.1 – One USB Micro-B input at transmitter, dual USB-A outputs

at receiver

• Bi-Directional IR – Dual 3.5 mm jacks at both the transmitter and receiver

(Optional) Connect the included IR-OUT cable to the transmitter unit's

IR-OUT port. Place the sensor on the IR-OUT cable in an unobstructed

area within clear view of the device being controlled. Then connect the

included IR-IN cable to the receiver unit's IR-IN port. The IR-IN cable will

communicate the desired command via the transmitter's IR-OUT cable.

Note: The IR-OUT cable receives the signal from the remote control and

sends it to the device being controlled (e.g. Blu-ray™ player, etc.).

(Optional) With a user-supplied USB Micro-B cable (such as Tripp Lite

U050-XXX Series USB cable), connect to the transmitter's Micro-B port.

Then connect a keyboard and mouse to the available USB-A ports on the

receiver unit.

-03-131 933D25 RevC.indd 18

(B127A-1A1-BDBD and B127A-1A1-BDBH only)

3/22/2021 3:19:58 PM

Table of Contents

B127a-1a1-bdbh B127a-110-bd B127a-111-bdtd