General; Using This Manual - Pacific Power Source AMX Series Operation Manual

1.0

GENERAL

This manual is written to provide the information required to use the AMX-Series AC Power
Source. Operation of the Models 105-AMX, 108-AMX, 112-AMX, 125-AMX, 140-AMX,
160-AMX, 305-AMX, 308-AMX, 312-AMX, 320-AMX, 345-AMX, 360-AMX, 390-AMX and
3120-AMX is described in this document.
This manual is an Operations Manual. Installation, operation and calibration are the subjects
covered by this manual.
1.1

USING THIS MANUAL

This manual provides instructions for installation and use of the AMX-Series Power Source
equipment. It is very important that the user reads sections 1, 3, and 4 prior to using this
equipment. A thorough understanding of these sections is required to properly operate this
equipment.
Section 2 states the specifications of the equipment.
required to gain maximum use of this equipment for a given application.
encouraged to read this section in order to gain a deeper understanding of the capabilities of
the AMX-Series Power Source.
Sections 5 and 6 list maintenance and calibration requirements of this equipment. Refer to
these sections when maintenance or calibration is required.
Section 7 describes service methodology and provides system, sub-assembly, and
component part numbers to aid the user in making factory authorized field repairs.
Section 9 contains any product change notices, errata and data relative to customer specified
modifications. Always check this section before operating the equipment. This is especially
true when modifications have been installed, since these can change system operation.
If questions arise while reading this manual, the user is encouraged to call the Pacific Power
Source. Pacific maintains a toll-free number which is 1-800-854-2433 (1+949-251-1800
outside of US).
SECTION 1
GENERAL
1
Knowledge of this information is
The user is