Nilfisk-Advance Core 125 Repair Manual page 9

Dismount / mounting of switch box cover and switch box Core 130 / Core 140.
1. Remove the 4 screws. (fig 1)
2. Remove the switch box cover. (fig 1)
3. Assembly: Ensure that the single cords are inside the box and are not squeezed during
assembly and that cable relief is mounted correctly in the slut in the switchbox.
4. Assembly: Ensure that the switch is correctly mounted the two fixing tap's (fig 2)
5. Assembly: Turn knob axle counter clockwise, and align with knob in its right position
when mounting the front part including the knob.
Fig. 1
Service / Repair.
9
Fig. 2
Fig. 3
D