Elo TouchSystems ET1517L User Manual page 6

Connector Panel & Interfaces
Touchmonitor Connections
1. C c
c ,
2. Connect the USB/serial touch cab
PC USB/serial port.
3. Select the correct power cable for your region. Connect the power cable between the AC
power source and the
4. Alternatively, if you have purchased an optional power adapter and elected to use it, connect
the cable between the AC power source and the optional
C c
5. The touchmonitor ships in an OFF state. Press the power button to turn it on.
Elo Touch Solutions | 670 N. McCarthy Blvd., Suite 100 | Milpitas, CA 95035 | 800 ELO TOUCH | +1 408 597 8000 | www.elotouch.com
VGA cab b
c . T
AC input power jack.
a a DC
VGA input connectors and your VGA
cab c
b
c c
b a c .
USB/serial connector and your
a a c
DC input power jack.
c .