Home Decorators Collection JUNEDALE Use And Care Manual page 8

Assembly - Standard Ceiling Mount
1
Preparing for mounting
□
Remove the magnetic canopy bottom cover (DD) from the
canopy (B) by pulling it off.
□
Loosen the two canopy screws (CC) located in the bottom of
the mounting bracket (A).
□
Turn the mounting bracket (A) counterclockwise and lift it up to
remove the mounting bracket from the canopy (B).
2
Routing the wires
□
Route the wires exiting the top of the fan motor assembly (E)
through the decorative motor collar cover (D) and then the
center of the canopy bottom cover (DD).
□
Make sure the opening of the canopy (B) is on top and insert
the ball/downrod (C) through the canopy (B).
□
Route the wires exiting the top of the fan motor assembly (E)
through the downrod as shown.
B
C
D
8
A
CC
B
DD
DD
E