Erase The Backup Data - Sanav MU-201 S2 User Manual

Reset Report interval
*
Situation
Success

Erase the Backup Data

The device reports GPRMC data to the server/cell phone normally via GSM/GPRS/3G mobile network.
When the GSM/GPRS/3G is not in service or the GSM/GPRS/3G signal strength is poor, the GPRMC data will not
be able to report to the server. They will be saved to flash memory as backup and back to the server when
GSM/GPRS/3G service is recovered.
User can use this command to erase the logged (historical) GPRMC data stored at the flash memory of the
device.
Setup Format: #「MU201S2」,「Password」,「Function Mode」*
Command: #MU201S2,0000,er*
SMS/ COTA Command
#
MU201S2
0000
er
*
Situation
Setup Succeeds
11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: 886-2-22694456｜Fax: 886-2-22694451｜sanav@sanav.com
31
The report interval for the Retrospective Location Mode when the device is in rest
state if<mode> setting to 4.
End sign.
Table32: Movement Setup Format Description
Response
<OK>MU201S2, setup OK, NM
Table33: Movement Setup Response Description
Description
Start sign.
Default ID of the device.
If you have changed the user name, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode "er" defines the Data Erase mode.
End sign.
Table34: Erase the Logged Data Format Description
Message Reply
MU201S2, setup OK, ER
Table35: Erase the Logged Data Response Description
新禾航電
2019.09.11
文管中心
www.sanav.com
www.sanav.com