Savant SmartLink HDBaseT HTX-SLN501 Quick Reference Manual

SmartLink HDBaseT™ Transmitter
Quick Reference Guide
The Savant® HTX-SLN501 SmartLink HDBaseT™ Transmitter is
capable of transmitting:
HDMI audio and video
•
IR and RS-232 control
•
Ethernet
•
Power over HDBaseT (PoH) up to 328 ft (100 meters) via a single
•
Cat 5e/6/7 cable.
Endpoints can be a Savant HDBaseT receiver or any HDBaseT
compliant receiver.
IMPORTANT!
The HDBaseT connections on the SmartLink Matrix are 5Play
compliant and feature Power over HDBaseT (PoH) which can
supply power to compatible HDBaseT receivers.
Read the Using Power Over Hdbaset (Poh)
making any connections to avoid damaging connected devices.

Box Contents

(1) SmartLink (HTX-SLN501)
(1) Installation Kit (075-0167-xx):
(1) 12V DC 1.6A Power Supply with Multi-country plugs
(025-0166-xx)
(2) M3 x 4 mm Screws (039-0302-xx)
(1) Wall Mounting Bracket (071-0872-xx)
(1) 4 in Cable Tie (014-0071-xx)
(1) 4-Pin Screw Down Plug in Connector (028-9395-xx)
(1) Quick Reference Guide (this document)
Specifications

Environmental

Environmental
Temperature 32° to 104° F (0° to 40° C)
10% to 90% Relative Humidity (non-
Humidity
condensing)
25 cubic feet per minute (CFM)
Cooling
recommended.
Maximum BTU 7 BTU/hr

Dimensions and Weight

Dimensions and Weight
Height 0.94 in (2.39 cm)
Width 4.56 in (11.58 cm)
Depth 3.18 in (8.07 cm)
Weight Shipping: 1.35 lb (0.61 kg)

Power

Power
12V DC 1.6A
Power Supply
120-230V AC 50/60Hz
6 Watts
Maximum Power
18 Watts (when powering remote receiver)

Regulatory

Regulatory
Safety and Emissions FCC Part 15 | CE Mark | C-Tick
RoHS Compliant

Enclosure

Enclosure
Metal enclosure with Savant's Design Signature, black Metal enclosure with Savant's Design Signature, black

Minimum Supported Release

Minimum Supported Release
Savant OS da Vinci 6.0.1
HTX-SLN501-00 | 009-1102-07 | 160222 HTX-SLN501-00 | 009-1102-07 | 160222
Copyright © 2016 Savant Systems, LLC

Front Panel

section before
1 of 2
12V DC 1.6A - Connect to included power
12 VDC
supply.
Green: Link with HDBaseT 5Play compatible
receiver has been established.
Link Status Red: Power is present, but link to HDBaseT
LED 5Play™ compatible transmitter has not been
established.
Off: HTX-SLN501 is not receiving power.
Ground Connector (Optional) - Used to
connect to a suitable ground reference when
using Power over HDBaseT (PoH).
8-pin RJ-45 female shielded
HDBaseT 5Play compatible - Connect to Link
Link
connection on SmartLink HDBaseT Receiver,
SmartLink HDMI Matrix or 3
5Play compatible receiver.

Rear Panel

4-pin Screw Down Plug-in Connector
IR In: Receives IR Signals from a Savant or 3
party controller to control devices located
near the endpoint.
IR Out: Sends IR signals received from the
IR In/Out
endpoint to control devices located near the
start point. Can be connected to an IR
Flasher or directly to a device's IR Input.
See Ir Wiring
regarding IR functionality before making any
connections.
19-pin type A HDMI female
Supports HDMI and DVI (DVI/D Compatible)
HDMI In
DVI requires DVI to HDMI adapter (not
included)
RJ-45 10/100 Base-T, auto-negotiating port
LAN
with Link/Activity LEDs.
Off: Ethernet link is not established.
Link LED Green Solid: Ethernet link is established.
Green Blinking: Ethernet activity is occurring.
Off: 10 Mbps data rate
Data Rate
LED
Green: 100 Mbps data rate
Used to transmit and receive serial binary data
to and from serial controllable devices located
RS232
at the end point. 8-pin RJ-45 female.
See Rs-232 Wiring
45 Perseverance Way, Hyannis, MA 02601
For Product Info
rd party HDBaseT
rd
for important precautions
for pinouts.
Savant.com | 508.683.2500