Porsche 718 Cayman GT4 Owner's Manual page 166

Configuring WiFi settings
button e
1.
SET PHONE e WiFi settings
2. Selected the desired setting:
– Activate/deactivate WiFi: Switch WiFi function
of the PCM on/off.
– Configure WiFi hotspot in PCM: Display and set
up the PCM's WiFi access data. These data are
required to connect a device (e.g. mobile phone)
to the PCM or WiFi and to use the PCM's WiFi
hotspot.
– Use external data connection: To establish a data
connection with an external WiFi hotspot (e.g.
public hotspot).
– Connect to WiFi hotspot: Search for new WiFi
hotspot and enter the access data for the hotspot
(user name and password). Be aware of upper and
lower case when entering the data.
f Please see chapter „Connectivity" on
page 74.
Deleting external WiFi hotspot
button e
1.
Connections e Data connection
2. Select the icon of the WiFi hotspot to be
deleted.
Configuring data connections
button e
1.
SET PHONE e Data connections
2. Selected the desired setting:
– Data connections:
– On: Data connections are always approved.
– Off: Data connections are switched off.
– Prompt: Before using the data connection, a
message appears as to whether the data
connection should be approved.
– Share data connection: Approve data connection
for WiFi devices.
– Roaming: Allow or block data connections in
external networks.
– Configure APN: Change network access data for
the SIM card data connection (APN name, user
name and password).
– Reset access point configuration: Reset APN
settings to factory settings.
f For information on APN settings: Please see
chapter „Establishing a data connection via an
external SIM card" on page 74.
button e
button e button e
Managing contacts
button e
1.
SET PHONE e Contacts
2. Selected the desired setting:
– Contact memory: Display the used contact
memory.
– Sort criteria: Sort the contacts stored in the
mobile phone by first name or by last name.
– Sync contacts: Contacts from the SIM card or the
mobile phone connected via Bluetooth® can be
transferred to the PCM manually.
Changing tone settings
b The mobile phone is connected with the PCM.
button e
1.
SET PHONE e Tone settings
2. Selected the desired setting:
Available settings are:
– Select ringtone: Set the PCM ringtone if the
ringtone is not transferred to the connected
mobile phone via Bluetooth®.
– Ringtone volume: Setting the ringtone volume.
– Microphone sensitivity: Set microphone sensi-
tivity for phone calls.
– Alert tone for messages: Setting or disabling the
alert tone for incoming messages.
Phone
A
button e
B
C
D
E
F
G
H
I
J
K
button e
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
163