Advertisement
Available languages
Available languages
under-worktops are not in the optimum position.
Raise the vitroceramic glass
retaining rod in place, locking the worktop in the
raised position, and reposition the cast iron
under-worktops.
3. OPTIONAL ACCESSORIES
Hergóm has the following accessories for this
stove:
Vitreous enamel steel pipes.
•
Stainless steel pipes
•
Elbows/bends and cowls for constructing the
•
chimney.
4. CLEANING AND MAINTENANCE
OF THE
FRONT,
ENAMELLED UNDER-WORKTOPS.
Cleaning should be done preferably when the
hearth is cold, using slightly damp cloths with
soapy water to do it, and then dry it.
Avoid using strong detergents or abrasive
products that could damage the enamel.
OF THE VITROCERAMIC GLASS
The vitroceramic glass plate should never be
cleaned on its underside.
worktop,
put the
8
9
WORKTOP
FRAME
The outer surface should only be cleaned using a
scraper
vitroceramic glass, for sale in supermarkets,
hardware stores, hypermarkets, etc.
Scraper:
This is used to clean food remains, grease
spatters, etc. when still hot, to stop them from
sticking more firmly to the surface when they
cool down
The scraper should be always within easy reach.
Cleaning products
When the plate has already cooled, use a special
cleaner for vitroceramic glass, applying it with
kitchen towels.
Then wipe it clean with a damp cloth, and dry it
with a clean cloth.
We do not recommend using sponges or other
high-absorption kitchen cloths, as the liquid part
of the cleaning products is absorbed, leaving the
harsher or highly concentrated components on
their surface, which could lead to scratching or
abrasions.
There are preservative products that produce a
shiny protective layer against dirt.
If small pieces of aluminium foil, plastic, sugar or
other materials that melt quickly fall onto the
surface of the worktop, they should be
eliminated immediately while the worktop is hot
using the scraper, to prevent the surface from
getting damaged.
Some materials on the bottom of containers can
leave marks with a metallic shine on vitroceramic
glass. There are products on the market that
solve these problems.
Limescale marks on the surface can also be
eliminated, but they are avoidable if the surfaces
AND
of the containers are clean and dry.
If marks or damages appear on the plate, it is due
solely to the fact that products not specified for
vitroceramic glass have been used.
Under no circumstances should metal scouring
pads, steel wool, knives or any another utensil
that is liable to damage the vitroceramic glass
surface be used for cleaning the worktop.
Make sure that any containers that are used are
special for vitroceramic glass and, failing that,
19
and
products
appropriate
for
Advertisement
