Advertisement
Available languages
Available languages
1. PRESENTATION OF THE ECLECSYS
STOVE
The front of the ECLECSYS stove is made of cast
iron enamelled in vitreous porcelain, the fittings
are made of chrome-plated cast brass and the
controls are made of stainless steel.
The internal frame of closed stoves is made of
galvanised steel.
The frame of the worktop is made of steel plate
enamelled in vitreous porcelain.
The worktop is hinged and made of vitroceramic
glass with a stainless steel frame and under-
worktop made of enamelled cast iron.
The oven is made of stainless steel and includes a
vitroceramic glass roasting tray and steel rod grill.
The oven door oven is made of screen-painted
tempered glass, with a thermometer to control
the temperature when preparing food.
There is an anti-roll support for baking trays,
which allow trays to slide in almost the entire
length, without there being a risk that the food
being cooked will spill.
These supports can be dismantled easily (slide
them upwards, releasing them from the lower
orifice and then slide them outwards to free
them from the upper orifice), to make them
easier to clean out of the oven.
Note: If the stove is used for heating the house,
for prolonged periods, it is recommended to
remove the cast iron worktop located under the
vitroceramic glass, in order to generate more
heat while you are there, consume less fuel and
thus avoid the interior deterioration of the stove.
Provision of secondary air:
Through the upper area of the glass of the
•
stove door, which at the same time acts as a
glass cleaner.
Through the rear of heat-resistant stove,
•
which at the same time serves to cool this
part.
Soot door that is aesthetically hidden under the
oven door.
The stove has an access system to the chimney,
in order to make it easier to seal it, once the
stove has been installed (See section 2,
"Operating Instructions").
Side
supports
Roasting
tray
Grilling tray /
roasting grill
13
SOOT DOOR COVER
Advertisement
