2.- Fitting the handrail
To fit the handrail, proceed as follows (Fig. 13):
1. Remove the right-hand screw securing the front of the cooker at the top.
2. Position the right-hand end of the handrail as indicated in the figure and
retighten the screw. Fit the other screw supplied and finally secure the end.
3. Remove the left-hand screw securing the front of the cooker.
4. Position the handrail and the left-hand end and retighten the screw. Fit the
other screw supplied and finally secure the handrail.
HERGÓM supplies the following accessories
for this cooker:
Steel tubes in vitrified enamel.
Stainless steel tubes.
Elbow
joints
construction.
Fig.-13
IV .- OPTIONAL ACCESSORIES
and
cowls
for
chimney
12