Theory Of Operation; Sensor Specifications; Credit Card Reader; Barcode Scanner - Elo TouchSystems 1529L User Manual

Theory of Operation

The USB host initiates communication with the FDU01 using operation commands
(Sensor LED On, Fingerprint Capture Start and Stop). Fingerprint data are then cap-
tured by the CMOS sensor at a total image size of 356 x 292 with 8-bit gray level. The
image frame transfer speed is 500 bytes/ms. It takes about 600 milliseconds to send one
frame of image data over USB protocols. FDU01 uses the SecuGen FOR (Fingerprint
Optic Reader).

Sensor Specifications

Credit Card Reader

There is a USB credit card reader only. The USB version is available in HID and Key-
board emulation versions. The reader reads all three stripes on a standard credit card or
drivers license.
Reference Standards-Conform to
applicable standards
Message Format
Card Speed
MTBF Electronics

Barcode Scanner

Omni-directional scanner:

1. Ability to read 1D codes with a 360º rotation, eliminating the need to orient the
2. Scan angle
3. Ability to read 2-D barcodes (PDF417, Micro PDF)
4. Ability to read damaged or poorly printed barcodes
1-4 Elo Touchmonitor User Guide
Specifications
Sensor
Image Capture Speed
Image Transfer Speed
Pixel Resolution
USB Signaling Type
Sensor
Resolution
Verifying Time
Image Capture Error Rate
Life Time Typically
International Standards Organization, American National Standards
Institute, California Drivers License, American Association of Motor
Vehicle Administrators
ACCII
3 to 50 IPS
125,000 hrs; Head 1,000,000 passes
scanner in the field of view
Minimum horizontal: 34º ± 1.5º
Minimum vertical: 12.5º ± 1.5º
SecuGen FOR
600ms/frame
500Byte/ms
356x292
Full Speed Type
CMOS Image Sensor
500dpi
<1sec
<0.1%
40,000Hrs