How To Operate The Bicycle; Switch On The Battery; Sama-Display; Turn On The Display - Lacros AMBLING A200 Original Manual

CE ORIGINAL MANUAL

3. How to operate the bicycle

Switch on the battery

The battery is located on the luggage rack with the Scamper.
Switch on the electrical system with the button on the left side
of the battery (B). (note, you only have the battery activated,
the display is still off) The number of lights indicates the
battery charge. This is a rough indication of the battery charge.
If you want to turn off the battery, press and hold the on / off
button for 4 seconds until you see the display go out.
A = Lock
B = On/off button
C = Indicator
D = Rear light
E = Brake light

▪ SAMA-Display

Turn on the display

Press (1) to turn on the bicycle electrical circuit. A menu now
appears on the display, the electric circuit is switched on.
1 = On/Off button
2 = motor support up/light
3 = motor support down

Switch bicycle LED lights on and off

Press (2) for ± 2 seconds to turn the lights on. A light-symbol
will appear on the display. Press (2) for 2 seconds to turn off
lights.

Thumb lever walk assist

By pushing the thumb lever (A) forward when stationary, you activate the
walk assist which provides support from 0 km/h to 6 km/h. By using the
thumb lever while cycling, the electrical support goes directly to its maximum
(25 km/h).
LACROS AMBLING A200(XL)/A400(XL)
7
VERSION CE 1.4 EN