Device Overview; Connecting The Device - Triax TDcH 16S-I-Q User Manual

TDcH Compact Headend
Potential equalisation:
Equalise the potential (PE) in accordance with IEC/EN/DIN EN 60728.
Connect the PE connection terminal to a PE rail (supplied by customer) using the PE wire (Cu 4 mm² - 9 mm²).

4.2 Device overview

4.3 Connecting the device

•
Connect the SAT IF inputs to the corresponding outputs of an LNB or multi switch. Make sure that all inputs
have the same level and are in the required level range!
11 EN