Triax TDcH 16S-I-Q User Manual page 43

TDcH Compact Headend
Select service:
Note:
Services can be assigned to a output channel in direct conversion or as a new multiplex. In the direct conversion a full
input transponder is assigned to a output channel. If a new multiplex is made, single services can be chosen from
independent input transponders.
Direct channel conversion:
Select under DESTINATION for each Input the output you
would like to use the direct conversion function.
Note:
All services below this input will be shown as assigned to
the selected outputs and cannot be used for other outputs!
Please note that services allocated in direct conversion to a
output are not shown in the LCN table. Only services
allocated in new multiplexes are shown in the LCN list!
New multiplex:
If you would like to make a new output multiplex you can select individual services from different inputs for each
output.
Note:
Please ensure that in both variations the output bandwidth is not overloaded!
43 EN