Brother DCP-J1050DW Online User's Manual page 462

Level 3 Level 4
WLAN(Wi-Fi) TCP/IP
WPS/Push Button
WPS/PIN Code
Recover WLAN
WLAN Status
MAC Address
WLAN Enable
Wi-Fi Direct Manual
Group Owner
Push Button
PIN Code
Device
Information
Status
Information
I/F Enable
Message from Message from
Brother Brother
Status
Level 5 Level 6 Descriptions
WINS -
Configuration
WINS Server -
DNS Server -
APIPA -
IPv6 -
- -
- -
- -
Status -
Signal -
SSID -
Comm. Mode -
- -
- -
- -
- -
- -
- -
Device Name -
SSID -
IP Address -
Status -
Signal -
- -
- -
- -
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP
address from the link-local address
range automatically.
Turn the IPv6 protocol on or off.
Configure your wireless network settings
using the one-button push method.
Configure your wireless network settings
using WPS with a PIN.
Reset and restart your wireless network.
View the current wireless network status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication mode.
View the machine's MAC address.
Turn the wireless network connection On
or Off.
Configure your Wi-Fi Direct network
settings manually.
Set your machine as the Group Owner.
Configure your Wi-Fi Direct network
settings using the one-button push
method.
Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network
status.
View the current Wi-Fi Direct network
signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
Turn the Wi-Fi Direct connection on or
off.
Display messages and notifications from
Brother.
456