Brother DCP-J1050DW Online User's Manual page 236

Home > Network > Wireless Network Settings
Wireless Network Using the One Push Method of Wi-Fi Protected Setup
Configure Your Machine for a Wireless Network Using the One Push
Method of Wi-Fi Protected Setup
If your wireless access point/router supports WPS (Push Button Configuration), you can use WPS from your
machine's control panel menu to configure your wireless network settings.
>> DCP-J1050DW/MFC-J1010DW
>> DCP-J1140DW
DCP-J1050DW/MFC-J1010DW
1. Press or WiFi on the control panel.
2. Press a or b to select the [WPS/Push Button] option, and then press OK.
3. When [Enable WLAN?] appears, press c.
The wireless setup wizard starts. To cancel, press d.
4. When the LCD instructs you to start WPS, press the WPS button on your wireless access point/router. Then
press c on your machine. Your machine automatically tries to connect to your wireless network.
When your wireless device connects successfully, the machine displays [Connected].
You have completed the wireless network setup. To install the drivers and software necessary to use your
machine, go to your model's Downloads page at support.brother.com.
DCP-J1140DW
1. Press [Settings] > [Network] > [WLAN(Wi-Fi)] > [WPS/Push Button].
2. When [Enable WLAN?] appears, press [Yes].
The wireless setup wizard starts. To cancel, press [No].
3. When the touchscreen instructs you to start WPS, press the WPS button on your wireless access point/
router. Then press [OK] on your machine. Your machine automatically tries to connect to your wireless
network.
If your wireless device is connected successfully, the LCD displays [Connected].
You have completed the wireless network setup. To install the drivers and software necessary to use your
machine, go to your model's Downloads page at support.brother.com.
Related Information
• Use the Wireless Network
> Use the Wireless Network
™
(WPS)
> Configure Your Machine for a
™
(WPS)
230