Brother DCP-J1050DW Online User's Manual page 289

Option
No Verification
CA Cert.
CA Cert. + ServerID The verification method to check the common name
7. When finished with configuration, click Submit.
For wired networks: After configuring, connect your machine to the IEEE 802.1x supported network. After a
few minutes, print the Network Configuration Report to check the <Wired IEEE 802.1x> status.
Option Description
Success The wired IEEE 802.1x function is enabled and the authentication was successful.
Failed The wired IEEE 802.1x function is enabled; however, the authentication failed.
Off The wired IEEE 802.1x function is not available.
Related Information
• Use IEEE 802.1x Authentication for a Wired or a Wireless Network
Related Topics:
• Print the Network Configuration Report
• Print the WLAN Report
• Access Web Based Management
• Configure Certificates for Device Security
• Supported Security Certificate Features
The common name verification compares the common name of the server certificate to the character string configured for the Server ID.
1
Before you use this method, contact your system administrator about the server certificate's common name and then configure Server ID.
Description
The server certificate can always be trusted. The verification is not performed.
The verification method to check the CA reliability of the server certificate, using the
CA certificate issued by the CA that signed the server certificate.
in addition to the CA reliability of the server certificate.
1
value of the server certificate,
283