Brother DCP-J1050DW Online User's Manual page 160

Home > Fax > Receive a Fax
Choose the Correct Receive Mode
Related Models: MFC-J1010DW
You must choose a Receive Mode depending on the external devices and telephone services you have on your
line.
By default, your machine automatically will receive any faxes that are sent to it. The diagram below will help you
select the correct mode.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Setup Receive]. Press OK.
c. Select [Receive Mode]. Press OK.
If the option to change the Receive Mode is unavailable, make sure the BT Call Sign feature is set to
[Off].
3. Press a or b to select the [Fax Only], [Fax/Tel], [External TAD], or [Manual] option, and then
press OK.
4. Press Stop/Exit.
Related Information
• Receive Mode Settings
Related Topics:
• Enable the Machine to Work with BT Call Sign (with Your External Telephone only)
• Connect an External TAD
• Telephone and Fax Problems
> Receive Mode Settings > Choose the Correct Receive Mode
154