Other Operations; Switching Between Digital And Analog Audio (Input Mode) - Sony STR-DH800 Operating Instructions Manual

6
Press V/v repeatedly to select
the setting you want.
• STBY OFF: You cannot enjoy the S-
AIR receiver while the S-AIR main unit
is in standby mode.
• STBY ON: You can enjoy the S-AIR
receiver while the S-AIR main unit is in
standby mode or turned on.
To exit the menu
Press MENU/HOME or AMP MENU.
Notes
• When you set "S-AIR STBY" to "STBY ON", the
power consumption increases during the standby
mode.
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set "S-AIR STBY".
• When the wireless transmitter is removed from the
S-AIR main unit, "S-AIR STBY" is set to "STBY
OFF" automatically.
• If you have selected TUNER (FM/AM band) on
the S-AIR main unit before you turn it off and
"S-AIR STBY" is set to "STBY ON", you can only
select the same band for the tuner on the S-AIR
receiver. However, you can select input other than
TUNER on the S-AIR receiver.
• The sound of the S-AIR receiver may be cut off by
operation of the S-AIR main unit.

Other Operations

Switching between
digital and analog audio
(INPUT MODE)
When you connect components to both digital
and analog input jacks on the receiver, you can
fix the audio input mode to either of them, or
switch from one to the other, depending on the
type of material you intend to watch.
1
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
x AUTO
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
x ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function is selected,
audio input is set to "ANALOG" automatically and
you cannot select other modes.
• When SIRIUS, HDMI 1–4 or DMPORT input is
selected, "------" appears on the display, and you
cannot select other modes. Select an input mode
other than the SIRIUS, HDMI 1–4 and DMPORT
input, then set the audio input mode.
93 US