Using A Bi-Amplifier Connection - Sony STR-DH800 Operating Instructions Manual

Recording onto a recording
media
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (VIDEO 1) for
recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Note
Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the source.
100 US
Using a bi-amplifier
connection
If you are not using surround back speakers,
you can connect the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals using a bi-amplifier
connection.
To connect speakers
Front speaker
(R)
Hi
ANTENNA
AM
EZW-T100
SIRIUS TV
Lo MONITOR
IN 3 IN 2 IN 1
OUT DMPORT
Y DC5V
0.7A MAX
IN
OPTICAL
P / B
C B
VIDEO VIDEO VIDEO VIDEO VIDEO
IN IN OUT IN OUT
P /
R
C R
COMPONENT VIDEO ASSIGNABLE (INPUT ONLY) AUDIO AUDIO AUDIO AUDIO MONITOR
OUT IN IN IN IN OUT IN
L
AUDIO
OUT
R
SA-CD/CD/CD-R TV SAT BD VIDEO 1
SUBWOOFER
CENTER
SURROUND BACK/
BI-AMP/
FRONT B
R L
SPEAKERS
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
Front speaker
(L)
HDMI
IN 4 IN 3 IN 2 IN 1 OUT
ASSIGNABLE (INPUT ONLY)
DIGITAL (ASSIGNABLE)
SAT BD DVD
IN IN IN
OPTICAL COAXIAL
CENTER SURROUND
R L
SURROUND BACK/
BI-AMP/
FRONT B
FRONT A
R L R L
SPEAKERS
SURROUND
R L
FRONT A
R L
Hi
Lo