Other Operations; Switching Between Digital And Analog Audio (Input Mode); Using Other Video/Audio Input Jacks (Input Assign) - Sony STR-DN1030 Operating Instructions Manual

Other Operations

Switching between
digital and analog audio
(INPUT MODE)
When you connect equipment to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote control.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display panel.
• AUTO: Gives priority to digital audio
signals. If there are more than one
digital connection, HDMI audio signals
have priority.
If there are no digital audio signals,
analog audio signals are selected. When
TV input is selected, priority is given to
the Audio Return Channel (ARC)
signals. If your TV is not compatible
with the ARC function, the digital
optical audio signals are selected.
If the Control for HDMI functions of
both the receiver and the TV are not
activated, the ARC does not work.
• COAX: Specifies the digital audio
signals input to the DIGITAL
COAXIAL jack.
• OPT: Specifies the digital audio signals
input to the DIGITAL OPTICAL jack.
US
88
• ANALOG: Specifies the analog audio
signals input to the AUDIO IN (L/R)
jacks.
Notes
• Based on the input, "------" appears on the display
panel, and other modes cannot be selected.
• When "A. DIRECT" is being used, audio input is
set to "ANALOG". You cannot select other modes.
Using other video/audio
input jacks
(Input Assign)
You can reassign video and/or audio signals to
another input jacks.
After you have reassigned the input jacks, you
can use the input button (or INPUT
SELECTOR on the receiver) to select the
equipment you connected.
Component video and digital
audio input assign
You can reassign the COMPONENT VIDEO
and DIGITAL input jacks to other input if the
default settings of the jacks do not correspond
to your connected equipment.
Example:
When you connect the DVD player to the
OPTICAL SAT/CATV IN and
COMPONENT VIDEO SAT/CATV (IN 2)
jacks.
– Assign the OPTICAL SAT/CATV IN jack to
"BD/DVD".
– Assign the COMPONENT VIDEO SAT/
CATV (IN 2) jacks to "BD/DVD".
1
Press MENU.
The menu is displayed on the TV screen.
2
Select " Input", then press
or b.