Sony STR-DH800 Operating Instructions Manual page 9

About the indicators on the display
1 2 3
wa w;
Name Function
A SW
Lights up when the audio signal
is output from the
SUBWOOFER jacks.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C Input
Light up to indicate the current
indicators input.
COAX Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the COAXIAL
jack (page 93).
OPT
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
jack (page 93).
ANALOG
Lights up when INPUT MODE
is set to "ANALOG" or no
digital signals are detected
when INPUT MODE is set to
"AUTO" (page 93).
4 5
ql 3 qk qj qh
6 7
qg qf qd qs
Name Function
D Dolby
Lights up one of the respective
Digital indicators when the receiver is
Surround
decoding the corresponding
indicators Dolby Digital format signals.
D Dolby Digital
D EX Dolby Digital Surround EX
D+ Dolby Digital Plus
TrueHD Dolby TrueHD
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
"AUTO" (page 93).
E Neural - THX Lights up when the receiver
applies Neural - THX
processing to input signals.
F DTS(-ES)
Light up when DTS or DTS-ES
indicators signals are input.
DTS Lights up when the receiver is
decoding DTS signals.
DTS-ES
Lights up when the receiver is
decoding DTS-ES signals.
DTS 96/24
Lights up when the receiver is
decoding DTS 96 kHz/24 bit
signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
"AUTO" (page 93).
G D.RANGE
Lights up when dynamic range
compression is activated (page
51).
8 9 0
qa
continued
9 US