4B: Connecting The Video Components - Sony STR-DH800 Operating Instructions Manual

4b: Connecting the video components

How to connect your
components
This section describes how to connect your
video components to this receiver. Before you
begin, see "Component to be connected"
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to "5: Connecting the antennas
(aerials)" (page 31).
Component to be connected
Component
TV
With HDMI jack
DVD player
Blu-ray disc player
Satellite tuner/Set-top box
VCR, DVD recorder
Camcorder, video game, etc.
If you want to connect several
digital components, but cannot
find an unused input
See "Enjoying the sound/images from other
inputs" (page 94).
24 US
Video input/output jack to be
connected
The image quality depends on the connecting
jack. See the illustration that follows. Select
the connection according to the jacks on your
components.
Page
21
25
27
Notes
28
• Before connecting cords, be sure to disconnect the
29
AC power cord.
• Be sure to turn on the receiver when the video and
30
audio signals of a playback component are being
30
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
Y
HDMI
P C
/
B B
P C
/
R R
COMPONENT VIDEO
Digital Analog
High quality image
VIDEO