Sony STR-DH800 Operating Instructions Manual page 89

x After pairing
Sound transmission is established between the
paired S-AIR main unit and S-AIR sub unit(s)
only.
Your room
S-AIR main unit
MASTER VOLUME
?/1
TONE INPUT SELECTOR
SPEAKERS
MEMORY/ 2CH/
TONE MODE INPUT MODE TUNING MODE TUNING ENTER A.DIRECT A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING
VIDEO 2 IN
PHONES AUTO CAL MIC VIDEO L AUDIO R
ID A
ID A
S-AIR sub unit
Pairing
1
Place the S-AIR sub unit that
you want to pair near the S-AIR
main unit.
2
Match the IDs of the S-AIR main
unit and the S-AIR sub unit.
• To set the ID of the S-AIR main unit,
see "To set the ID of the S-AIR main
unit" (page 87).
• To set the ID of the S-AIR sub unit,
refer to the operating instructions
supplied with the S-AIR sub unit.
3
Press AMP MENU.
4
Press V/v repeatedly to select
"S-AIR".
5
Press or b to enter the
menu.
6
Press V/v repeatedly to select
"PAIRING".
7
or b to enter the
Press
parameter.
Neighbor
No transmission
ID A
S-AIR sub unit
8
Press V/v repeatedly to select
the setting you want, then
press .
• START: The S-AIR main unit starts
pairing. "SEARCHING" flashes on the
display.
• CONDITION: You can check the
current ID. When the pairing setting is
not made, "NO PAIRING" appears on
the display.
9
Start pairing of the S-AIR sub
unit.
x For the surround amplifier
Refer to the operating instructions
supplied with the surround amplifier.
x For the S-AIR receiver
Refer to the operating instructions
supplied with the S-AIR receiver.
10
Pairing completed.
"COMPLETE" appears on the display.
To exit the menu
Press MENU/HOME or AMP MENU.
Note
Perform the pairing within several minutes after step
8. Otherwise, the pairing is canceled automatically
and "INCOMPLETE" appears on the display.
To cancel pairing
Reset the ID of the S-AIR main unit.
For details, see "To set the ID of the S-AIR
main unit" (page 87). You can select the same
ID as before.
89 US