Sony STR-DH800 Operating Instructions Manual page 88

Sound transmission is established as
follows (example):
S-AIR main unit
MASTER VOLUME
?/1
TONE INPUT SELECTOR
SPEAKERS
MEMORY/ 2CH/
TONE MODE INPUT MODE TUNING MODE TUNING ENTER A.DIRECT A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING
VIDEO 2 IN
AUTO CAL MIC VIDEO L AUDIO R
PHONES
ID A
S-AIR S-AIR
sub unit sub unit
Notes
• Sources with copyright protection may not be
playable on S-AIR sub unit.
• When sound transmission is established
– sound can only be output from the S-AIR
receiver if you connect the components to this
receiver via the analog jacks. The sound cannot
be output if the components are connected to the
COAXIAL, OPTICAL or HDMI jacks on this
receiver.
– the headphones function on the surround
amplifier is not available.
88
US
Other S-AIR
main unit
ID A ID B
ID A ID B
S-AIR sub unit
Pairing the S-AIR main unit with
a specific S-AIR sub unit
(Pairing operation)
To establish sound transmission, you need to
set the same ID for your S-AIR main unit and
S-AIR sub unit.
However, if your neighbors have S-AIR
products and their IDs are the same as yours,
your neighbors could receive the sound of
your S-AIR main unit or vice versa.
To prevent this, you can pair the S-AIR main
unit with a specific S-AIR sub unit by
performing the pairing operation.
x Before pairing
Sound transmission is established by the ID
(example).
Your room
S-AIR main unit
MASTER VOLUME
?/1
TONE INPUT SELECTOR
SPEAKERS
MEMORY/ 2CH/
TONE MODE INPUT MODE TUNING MODE TUNING ENTER A.DIRECT A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING
VIDEO 2 IN
PHONES AUTO CAL MIC VIDEO L AUDIO R
ID A
ID A
S-AIR sub unit
Neighbor
ID A
S-AIR sub unit