Enjoying The S-Air Receiver While The S-Air Main Unit Is In Standby Mode - Sony STR-DH800 Operating Instructions Manual

6
Press V/v repeatedly to select
the setting you want, then
press .
• RF AUTO: Normally select this. The
system changes "RF CHANGE" to "RF
ON" or "RF OFF" automatically.
• RF ON: The system transmits sound by
searching the better channel for
transmitting.
• RF OFF: The system transmits sound by
fixing the channel for transmitting.
To exit the menu
Press MENU/HOME or AMP MENU
Notes
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set "RF CHANGE".
• In most cases, you will not need to change this
setting.
• If "RF CHANGE" is set to "RF OFF,"
transmission between the S-AIR main unit and
S-AIR sub unit can be performed using one of the
following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
92
US
Enjoying the S-AIR
receiver while the S-AIR
main unit is in standby
mode
(For the S-AIR receiver only (not
supplied))
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode by setting
"S-AIR STBY" to "STBY ON".
SHIFT
1
VIDEO 1 VIDEO 2
4
DVD
7
SA-CD/
TUNER
CD
-/-- 0/10
HDMI1 HDMI2
CLEAR/>10
HDMI4
2CH/
A.DIRECT
A.F.D.
INPUT
AUTO CAL
MODE
DISPLAY
,
V/v/B/b
O
HOME
RETURN/
EXIT
MENU
1
Press AMP MENU.
2
Press V/v repeatedly to select
"S-AIR".
3
or b to enter the
Press
menu.
4
Press V/v repeatedly to select
"S-AIR STBY".
5
Press or b to enter the
parameter.
TV AMP
2 3
BD
5 6
SAT TV
Input
8 9
buttons
DMPORT
ENT/MEM
HDMI3
MOVIE MUSIC
NIGHT
SLEEP MODE
AMP
AMP
MENU
MENU
TOOLS/ MENU/
OPTIONS
HOME