Table of Contents
Advertisement
5. Attach the mounting base to the ceiling and secure
it with supplied screws. For cement ceiling, you
need to install wall plugs at first.
Figure 2-14 Attach Mounting Base to Ceiling
Note:
The supplied screw package contains self-tapping
screws and wall plugs.
6. Route the cables through the cable hole, or the side
opening.
7. Install the camera back to the mounting base and
secure it.
8. Connect the cables.
9. Power on the camera to adjust the view angle
according to the figure below.
Pan Position
[0° to 360°]
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
Ceiling/Wall Mounting with Junction Box
2.3.2
Before you start:
You need to purchase a junction box in advance. The
installation of ceiling mounting and wall mounting are
similar. Following takes wall mounting as an example.
Steps:
1. Paste the drill template on the wall.
2. Drill screw holes and the cable hole (optional)
according to the drill template.
Figure 2-15 Install Camera Back
Tilt Position
[0° to 75°]
Figure 2-16 3-Axis Adjustment
Wall Plugs
Screws
6
Rotation Position
[0° to 360°]
Advertisement
Table of Contents
