ITech IT8518B User Manual page 11

BAUDRATE SET
4800<DEFAULT>
9600
19200
38400
COMM. PARITY SET
NONE<DEFAULT>
EVEN
ODD
ADDRESS SET
KEY LOCK SET
EXIT
SYSTEM SET
MAX CURRENT SET
MAX POWER SET
MAX VOLTAGE SET
VOLTAGE ONSET
VOLTAGE OFFSET
EXIT
LIST SET
MODE SET
FIXED MODE
LIST MODE
CALL LIST FILE
EDIT LIST FILE
LIST STORE MODE
8 X 120 STEPS
4 X 250 STEP
2 X 500 STEPS
1 X 1000 STEPS
EXIT
LOAD ON TIMER
TIMER STATE
ON
OFF
TIMER SET
EXIT
EXIT
Setting baud rate.
Command parity setting.
Setting communication Flow mode
Setting keypad password.
Setup the maximum current.
Setup the maximum power.
Setup the maximum voltage
Setting operation mode.
Fixed mode.
Choosing List mode.
Recall list operation file.
Edit list operation file.
Users can choose 4 kind of memory space to
save the list file.
Total 8 files and each file have120 list steps.
Total 4 files and each file have250 list steps.
Total 2 files and each file have500 list steps
Total 1 file and each file have1000 list steps.
Setting LOAD ON timer state
When users choose ON, and then turn on the
electronic load input, the LOAD ON TIMER will
start working. When the LOAD ON TIMER is reach
the setup time, the electronic load input will turn
offautomatically.
Setting time of LOAD ON timer.
GENERAL INFORMATION
USER'S GUIDE 11