Agilent Technologies ESG Series Installation Note page 12
Esg family signal generators. cpu/motherboard q501 relocated to chassis kit
Hide thumbs
Also See for ESG Series:
- User and programming manual (446 pages) ,
- Quick start manual (31 pages) ,
- Manual supplement (31 pages)
Advertisement
Re-Assemble the Instrument
1. Turn the instrument off and unplug it.
2. Reinstall the instrument top cover with the 11 screws that secure it. Torque all T-10 Torque screws
to 9 in-lbs. Refer to
3. Reinstall the instrument's external covers by reversing the removal procedure.
a. Torque the four rear feet screws to 21 in-lbs.
Torque the strap handle screws to 21 in-lbs.
12
Figure
1.
Installation Note E4400-90379
Advertisement
