Intended Use; Residual Risks; Technical Data - Holzstar DB 900 Operating Instructions Manual

3

Intended Use

The lathe DB-Series is used exclusively for turning wood
or wood-like materials. The maximum turning length and
the maximum diameter of the workpiece to be machined
(see chapter "Technical data") must be observed. It is
suitable for private use, not for industrial use. Intended
use also includes compliance with all information in
these instructions. Any use beyond the intended use or
any other use is considered misuse.
WARNING!
Danger in case of misuse!
Misuse of the lathe can lead to dangerous situations.
- Only operate the lathe in the power range specified
in the technical data.
- Never bypass or disable the safety devices.
- Never work on materials other than those specified
for the intended use.
- Only operate the lathe in a technically perfect condi-
tion.
- Never machine several workpieces at the same
time.
Stürmer Maschinen GmbH assumes no liability for con-
structive and technical changes to the lathe.
Claims of any kind due to damage due to improper use
are excluded.
ATTENTION!
Certain types of wood and wood products produce
harmful dust emissions when processed. Therefore,
only use your machine in a well-ventilated room and
preferably use an extraction unit.
ATTENTION!
The machine may only be operated in a technically
perfect condition. Any faults must be rectified imme-
diately.
Unauthorised modifications to the machine or impro-
per use of the machine as well as disregard of the
safety regulations or the operating instructions
exclude the manufacturer's liability for any resulting
damage to persons or objects and invalidate the war-
ranty claim!
DB-Series | Version 3.09

3.1 Residual risks

Even if all safety regulations are observed and the ma-
chine is used in accordance with the regulations, there
are still residual risks, which are listed below:
- Injuries caused by flying work pieces or work piece
parts
- Fire hazard with insufficient ventilation of the motor
- Danger of electric shock, if the wiring is not correct.
- Danger from noise and dust (wear ear protection
and use a suitable extraction system).
WARNING!
It should be pointed out that every machine has resi-
dual risks. All operations (even the simplest ones)
must be carried out with great care. Safe working
depends on you!
4

Technical Data

Model
Max. turning Ø
Max. height
Max. width
Spindle head thread
Morse cone
Speeds
Speed stages
Motor output
Electrical connection
Dimensions L x W x H
Weight
Model
Max. turning Ø
Max. height
Max. width
Spindle head thread
Morse cone
Speeds
Speed stages
Motor output
Electrical connection
Dimensions L x W x H
Weight
Intended Use
DB 900
306 mm
153 mm
900 mm
M33 x 3.5
MK 2
500 - 2000 min-¹
Mechanical variable,
10 stages
550 W
230 V / 50 Hz
1380 x 330 x 1175 mm
80 kg
DB 1100
358 mm
179 mm
1100 mm
M33 x 3.5
MK 2
500 - 2000 min-¹
Mechanical variable,
10 stages
750 W
230 V / 50 Hz
1620 x 340 x 1215 mm
92 kg
7