Related Manuals for Holzstar DB 450
Summary of Contents for Holzstar DB 450
- Page 1 Operating Instructions Four-jaw Chuck DB 450 DB 510 VARIO DB 900 DB 1100 DB 1202 Four-jaw Chuck Ø 100 mm M33 x 3,5, Set 2...
-
Page 2: Table Of Contents
7.3 Clamping a workpiece in the chuck ....5 Fax: 0049 (0) 951 96555 - 55 7.4 Removing the adapter ........5 E-Mail: info@holzstar.de 8 Disposal, recycling of old equipment ... 6 Internet: www.holzstar.de 8.1 Decommissioning ..........6 8.2 Disposal of lubricants.......... 6 9 Spare parts .......... -
Page 3: Introduction
E-Mail: service@stuermer-maschinen.de cation. Internet: www.holzstar.de - Wear tight-fitting work clothes, safety goggles, re- spiratory protection, safety shoes and hearing pro- Spare parts orders: tection. Tie up long hair. Do not wear watches, bracelets, chains, rings or gloves when working... -
Page 4: Intended Use
Intended Use - The clamped material must not be too unbalanced Transport, packaging, storage to prevent it from being thrown out. - Remove all locking levers and Allen keys from the 5.1 Delivery and Transport lathe and chuck to avoid accidental injury. Before turning on the lathe, make sure that the chuck has sufficient clearance by turning it manually. -
Page 5: Assembly And Operation
Assembly and Operation Assembly and Operation ATTENTION! Before starting cleaning and assembly work, switch off the machine and disconnect the mains plug. 7.1 Mounting and securing the chuck to the wood lathe spindle To mount the four-jaw chuck on the spindle of the wood- Fig. -
Page 6: Disposal, Recycling Of Old Equipment
Disposal, recycling of old equipment Disposal, recycling of old equipment 9.1 Spare parts order Spare parts are available from authorised retailers. In your own interests and in the interests of the environ- ment, please ensure that all components of the machine The following key data is required for queries or spare are disposed of in the proper and approved way. -
Page 7: Spare Parts Drawing
Spare parts 9.2 Spare parts drawing The following drawings should help in case of service to identify necessary spare parts. To order, send a copy of the parts drawing with the parts marked to your authorized dealer. Fig. 4: Spare parts drawing of Four-jaw Chuck Four-jaw Chuck | Version 1.02... - Page 8 www.holzstar.de...
Need help?
Do you have a question about the DB 450 and is the answer not in the manual?
Questions and answers
Buongiorno devo cambiare la cinghia, come posso fare? Grazie