Model Db 1100; Electrical Connection; Operation - Holzstar DB 900 Operating Instructions Manual

8.1.3Mounting of spindle head
Fig. 7: Mounting of spindle head
Fix the spindle clamping lever (Pos.1, Fig.7) of the DB
900 in the following order: clamping handle, compres-
sion spring and screw.

8.2 Model DB 1100

8.2.1Assembly of the machine base
3
1
Fig. 8: Assembly of the machine bases
Attach the support plate (Pos.1, Fig 8) as shown in the il-
lustration. This requires the 4 hexagonal bolts, washers
and nuts supplied (Pos. 2, Fig. 8).
8.2.2Assembly of the machine bed
Place the machine base on a level work surface.Lift the
machine onto the machine frame with the aid of a second
person. Attach it with 8 hexagon socket screws M 8x35
(Pos.3, Fig. 8). Place a spring washer under each nut.
8.2.3Mounting of spindle head
On the DB 1100, the clamping lever (Pos. 1, Fig. 9) must
be screwed into the back of the spindle head.
1
Fig. 9: Mounting of spindle head
DB-Series | Version 3.09
1
2

8.3 Electrical connection

DANGER!
Risk of death due to electric shock!
Contact with live components may result in fatal
injury. Switched-on electrical components can make
uncontrolled movements and lead to serious injuries.
ATTENTION!
All work on the electrical installation may only be car-
ried out by a qualified electrician.
Step 1: Insert the power plug into a 230 V socket.
Step 2: The machine is now ready for operation.
9

Operation

NOTE ON LUBRICATION!
All moving parts must be lubricated before commis-
sioning. The belt cover must be removed to lubricate
the selector and drive shafts. Only an adhesive
grease may be used here, otherwise it can lead to
malfunctions!
In addition, guides, quills and bearings must be lubri-
cated with commercially available grease.
WARNING!
Danger to life!
There is a danger to life for the operator and other
persons if they do not observe the following rules.
- The lathe may only be operated by an instructed
and experienced person.
- The operator must not work when under the influ-
ence of alcohol, drugs or medication.
- The operator must not work if he is overtired or suf-
fers from illnesses affecting his concentration.
- The lathe may only be operated by one person.
Other persons must stay away from the work area
during operation.
DANGER!
Risk of death due to electric shock!
Contact with live components may result in fatal
injury. Switched-on electrical components can make
uncontrolled movements and lead to serious injuries.
- Disconnect the mains plug before making any adju-
stments to the machine.
Operation
11