Introduction; Copyright; Customer Service; Disclaimer - Holzstar DB 900 Operating Instructions Manual

1

Introduction

You have made a good choice by purchasing a HOLZ-
STAR Wood lathe DB-Series.
Carefully read the operating instructions prior to
commissioning.
They describe correct commissioning, intended use and
safe as well as efficient operation and maintenance of
your lathe.
The operating instructions form part of the lathe. Keep
these operating instructions at the installation location of
your lathe. Also observe the local accident prevention
regulations and general safety regulations for the use of
the lathe.

1.1 Copyright

The contents of these operating instructions are pro-
tected by copyright. Their application is permitted within
the context of the use of the lathe. Any further use shall
not be permitted without written consent by the manufac-
turer.
For the protection of our products, we shall register
trademark, patent and design rights, as this is possible in
individual cases. We strongly oppose any infringement
of our intellectual property.

1.2 Customer service

Please contact your specialist retailer if you have any
questions regarding your lathe or require any technical
information. Your specialist retailer will be happy to sup-
port you with specialist advice and information.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Germany
Repair service:
Fax: 0049 (0) 951 96555-111
Email: service@stuermer-maschinen.de
Spare parts orders:
Fax: 0049 (0) 951 96555-119
Email: ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and
knowledge gained from using the application, whichthen
could be shared and be valuable to develop our products
even further.
DB-Series | Version 3.09

1.3 Disclaimer

All data in these operating instructions has been com-
piled on the basis of the state-of-the-art, valid standards
and guidelines as well as our many years of expertise
and experience.
The manufacturer shall not be liable for damage in the
following cases:
- Non-observance of these operating instructions
- Unintended use
- Deployment of untrained staff
- Conversions at one's own responsibility
- Technical modifications
- Use of unauthorised spare parts
The actual scope of delivery may deviate from the de-
scriptions and illustrations in this document as a result of
special variants, optional extras or recent, technical
modifications.
The obligations defined in the supply contract shall apply
in addition to the general terms and conditions and the
manufacturer's general terms and conditions as well as
the statutory regulations valid at the time of the conclu-
sion of the contract.
2

Safety

This section provides an overview of all important safety
packages for personal protection as well as safe and reli-
able operation. The sections on individual service life
phases contain additional, specifically applicable safety
information.

2.1 Legend of symbols

Safety Instructions
Safety instructions in these operating instructions have
been highlighted with symbols. Safety instructions are in-
dicated by signal terms that express the degree of risk
involved.
DANGER!
This combination of symbol and signal term indicates
a directly dangerous situation which may cause death
or serious injury if not averted.
Introduction
3