Personal Protective Equipment; Safety Labels On The Lathe - Holzstar DB 900 Operating Instructions Manual

Operator
The operator is instructed by the operating company
about the assigned tasks and possible risks in case of
improper behaviour. Any tasks which need to be perfor-
med beyond the operation if it is indicated in these in-
structions and if the operating company expressively
commissioned the operator.
Qualified electrician
Due to their technical training, knowledge and experi-
ence as well as knowledge of the relevant standards and
regulations, skilled electricians are able to carry out work
on electrical systems and to recognize and avoid pos-
sible dangers independently.
Qualified personnel
Due to their professional training, knowledge and experi-
ence as well as their knowledge of relevant regulations
the specialist staff is able to perform the assigned tasks
and to recognise and avoid any possible dangers them-
selves.
Manufacturer
Certain works may only be performed by specialist per-
sonnel of the manufacturer. Other personnel is not au-
thorized to perform these works. Please contact our cus-
tomer service for the execution of all arising work.

2.4 Personal protective equipment

The personal protective equipment serves to protect per-
sons against impairments of safety and health while
working. The staff member has to wear personal protec-
tive equipment while performing different tasks on and
with the machine which are indicated in the individual
paragraphs of these instructions.
The personal protective equipment is explained in the
following paragraph:
Head protection
The industrial helmet protects the head against
falling objects and knocks against stationary objects
items.
Hearing protection
The hearing protection protects the ears against
damages of hearing due to noise.
Protective gloves
The protective gloves provide protection for the
hands against sharp-edged components, as well as
against friction, abrasions or deeper injuries.
DB-Series | Version 3.09
Safety boots
The safety boots protect the feet against crushes, fall-
ing parts and slipping over on slippery underground.
Protective clothes
Protective work clothing means tight-fitting clothing
with low tear resistance.
Eye protection
Protective glasses protect the eyes against projected
parts and splashes of liquid.

2.5 Safety labels on the lathe

The following safety signs are applied on the lathe (Fig.
1), which need to be observed and followed.
1
2
3
4
5
Fig. 1: Mandatory signs: 1 Use eye protection | 2 Use ear protection |
3 Wear a dust mask
Safety markings: 4 Warning of dangerous electrical voltage |
5 Safety instructions
If safety labels on the machine are damaged or missing,
this can cause errors, personal injury and material da-
mage.
The safety symbols attached to the machine must not be
removed. Damaged safety symbols must be replaced
immediately.
As soon as the signs are not clearly visible and compre-
hensible at first glance, the machine must be stopped
until new signs have been attached.
Safety
5